HVAC Aluminum Foil Tape AFR5090SW

Thickness 50um normal Aluminum foil backing, coated with synthetic rubber-resin adhesive, protected by an easy-release silicone paper liner.

HVAC foil tape without scrim reinforced backing is a commercial grade foil tape. Suitable for sealing joints and seams of foil-faced insulation materials.

  • HVAC Aluminum Foil Tape Introduction

AF-Alum. Foil backing

RRubber-resin adhesive

50-Backing thickness50um

90-Tape thickness 90um

SW-Self-wound, without release paper liner

 

Self-Wound Roll – A roll of tape in which each layer of tape is directly on top of the last one.  The roll contains no liner. The self wound Aluminium Foil Tape is a bright, soft temper aluminium foil, with a pressure sensitive adhesive. Foil is treated on one side with silicone for easy release on unwind.

AFR Series HVAC aluminum foil tape are single-faced adhesive tape of Aluminum Foil backing which is coated by Rubber-Resin adhesive (PSA). It is synthetic rubber adhesive systems. Rubber-resin Adhesive will be offer good tack and adhesion to a variety of surfaces, but will not perform well in colder temperatures.

AFR Series HVAC foil tape suitable for sealing joints and seams of indoor insulation materials. HVAC foil tape is most commonly used to exposed surfaces of Duct tape wrap, HVAC Ductwork, Pipeline insulation.

 

FEATURES

Aluminum backing provides excellent reflection of both heat and light.

High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application.

Low moisture vapor transmission rate makes AFR5090 an excellent vapor barrier.

Service Temperature range from -20℃ to +80℃.

 

TYPICAL PHYSICAL PROPERTIES

PROPERTIES

METRIC

ENGLISH

TEST METHOD

Backing Thickness

50 Micron

2.0Mil

PSTC-133 / ASTM D 3652

Total Thickness

90Micron

3.6 Mil

PSTC-133 / ASTM D 3652

Adhesion to Steel

15N/25mm

54Oz./In.

PSTC-101 / ASTM D 3330

Tensile Strength

75 N/25mm

17Lb/In

PSTC-131 / ASTM D 3759

Elongation

3.0%

3.0%

PSTC-131 / ASTM D 3759

Service Temperature

-20℃ to +80℃

-4℉ to +176℉

 

Applying Temperature

-10℃ to +40℃

+50℉ to +105℉

 

 

TYPICAL APPLICATIONS:

HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

 

ROLL SIZE:

Finish Roll:  

50mm x 50m     2” x 55yds

75mm x 50m     3” x 55yds

Log Roll:   1020mm x 50m                

Jumbo Roll: 1020mm x 3000m

RELATED NEWS

What is the best color for chroma key?

  Chroma Key is a visual-effects and post-production technique for compositing 2 images or video streams together based on color hues. The bes……

Gaffers tape Appliances

Gaffers tapes use for Film & television production, and also use for theatre, concerts, live shows. So it’s also named Gaff tapes, Stage tapes. ……

Why is it called Spike tape?

Spike tape normally cut to 1″ or 1/2″ narrow rolls, narrow stick and easy tear by hand. So this kind of narrow gaffers tape been named……