Black Lacquered Aluminum Foil Tape AFA2565B

Black lacquered 25 micron (1.0mil) Aluminum foil, combined with a high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.

Black Aluminium Foil tape use for taping exposed edges and board joints of HVAC ductwork system. Also used to block lighting spills on heat generating equipment. Matte black finish does not reflect light.

  • Black Lacquered Aluminum Foil Tape Introduction

AF-Alum. Foil backing

A-Acrylic adhesive

25-Backing thickness25um

65-Tape thickness 65um

B-Black Lacquered backing surface

 

AFA Series HVAC aluminum foil tapes are single-faced adhesive tape of Aluminum Foil backing which is coated by Solvent Acrylic adhesive (PSA). It is industrially manufactured, and thus can be manipulated based on the selection of the monomers used in the formulation.

Black Lacquered Aluminum Foil Tape will be offer good tack and adhesion to width range of temperature (from -30 degrees to 150 degrees ).

Black Lacquered Aluminum Foil Tape will be good aging stability, high resistance to UV, ozone and humidity, best useful in long-term, outdoor applications.

 

FEATURES

Black lacquered aluminum foil, match the Black FSK Faced Ductwork and Pipe insulation.

Matte black finish does not reflect light.

Good aging resistance both indoors and outdoors.

Low moisture vapor transmission rate offers excellent sealing and patching performance.

 

TYPICAL PHYSICAL PROPERTIES

PROPERTIES

METRIC

ENGLISH

TEST METHOD

Black coating

2.5 Micron

0.1Mil

PSTC-133 / ASTM D 3652

Backing Thickness

25 Micron

1.0Mil

PSTC-133 / ASTM D 3652

Total Thickness

62.5Micron

2.5Mil

PSTC-133 / ASTM D 3652

Adhesion to Steel

15N/25mm

54Oz./In.

PSTC-101 / ASTM D 3330

Tack Rolling ball

20cm

8.0In

PSTC-6 / ASTM D 3121

Tensile Strength

40 N/25mm

9.1Lb/In

PSTC-131 / ASTM D 3759

Elongation

3.0%

3.0%

PSTC-131 / ASTM D 3759

Service Temperature

-30℃ to +120℃

-22℉ to +248℉

 

Applying Temperature

-10℃ to +40℃

+50℉ to +105℉

 

 

TYPICAL APPLICATIONS:

AFA Series Acrylic adhesive HVAC Tape is most commonly used to exposed surfaces of Duct wrap, HVAC Ductwork, Exterior wall insulation, Metal building insulation, Pipeline insulation, Hot water tank insulation.

 

ROLL SIZE:

Finish Roll:  

50mm x 50m     2” x 55yds

75mm x 50m     3” x 55yds

Log Roll:   1020mm x 50m                

Jumbo Roll: 1020mm x 3000m

RELATED NEWS

Gaffers tape Appliances

Gaffers tapes use for Film & television production, and also use for theatre, concerts, live shows. So it’s also named Gaff tapes, Stage tapes. ……

Why is it called Spike tape?

Spike tape normally cut to 1″ or 1/2″ narrow rolls, narrow stick and easy tear by hand. So this kind of narrow gaffers tape been named……

Which gaffers tape is best?

The best Gaffers tape is matte surface Cloth backing material coated with a natural rubber-based adhesion system.     Gaffers tape cloth ……