Black aluminum foil tape used for taping exposed edges and board joints of HVAC ductwork system. Also used to block lighting spills on heat generating equipment. Matte black finish does not reflect light.
Matte black aluminum foil tape is a matte-black lacquered non-reflective tape. Single-faced adhesive tape of aluminum foil backing ,25 micron (1.0mil) aluminum foil, combined with a high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.
Black aluminum foil tape will be offer good tack and adhesion to width range of temperature (from -30 degrees to 150 degrees).It will be good aging stability, high resistance to UV, ozone and humidity, best useful in long-term, outdoor applications.
Matte black aluminum foil tape is primarily used in the entertainment industry for blocking and suppressing spills and leakages on heat generating equipment such as projectors, light cans, barndoors, and similar equipment. Lighting decorators / engineers can use it to create shadows, form barn doors and adapt gobos. Used in situations where extreme heat might otherwise burn flags or cutters,. Also used in the construction industry for joining elastomeric insulation systems.
|
PROPERTIES |
METRIC |
ENGLISH |
TEST METHOD |
|
Black coating |
2.5 Micron |
0.1Mil |
PSTC-133 / ASTM D 3652 |
|
Backing Thickness |
25 Micron |
1.0Mil |
PSTC-133 / ASTM D 3652 |
|
Total Thickness |
62.5Micron |
2.5Mil |
PSTC-133 / ASTM D 3652 |
|
Adhesion to Steel |
15N/25mm |
54Oz./In. |
PSTC-101 / ASTM D 3330 |
|
Tack Rolling ball |
20cm |
8.0In |
PSTC-6 / ASTM D 3121 |
|
Tensile Strength |
40 N/25mm |
9.1Lb/In |
PSTC-131 / ASTM D 3759 |
|
Elongation |
3.0% |
3.0% |
PSTC-131 / ASTM D 3759 |
|
Service Temperature |
-30℃ to +120℃ |
-22℉ to +248℉ |
|
|
Applying Temperature |
-10℃ to +40℃ |
+50℉ to +105℉ |
|
Finish Roll:
| 50mm x 50m | 2” x 55yds |
| 75mm x 50m | 3” x 55yds |
| Log Roll: | 1020mm x 50m |
| Jumbo Roll: | 1020mm x 3000m |
