This automotive masking tape features a specially formulated adhesive that bonds instantly to a variety of surfaces. It performing extremely well when used tape on tape and with masking paper and protective film. When this tape masking on car body, it maybe need large area to masking. The Pre-taped masking film is a drop sheet that pre-folded film rolls. It makes masking better, faster and easier.
Automotive masking tape ideal for use with water or solvent based automotive paint, the adhesive resists water and chemicals as well as bleed-through, edge curl or lifting. A primer layer anchors the adhesive to the backing, helping you remove the tape cleanly without slivering, virtually eliminating scraping or scrubbing adhesive residue after use. All of this is built into a very low-profile tape which won’t leave high paint edges that require extra buffing.
While there are different tapes for different applications, most car masking tapes have a similar purpose- to protect the car from overspray, dust, and other damage.
Essentially, it’s a safety measure, designed to protect your work, avoid unnecessary clean up and damage, and ensure quality finishing.
Automotive paint typically needs to be cured after application. This means heating it to high temperatures, and the tape must stay in place to prevent bleeding.
Automotive masking tape is designed with a specification for the temperature it is suitable for. This tape high temperatures resistant up to 110°C/230°F.
Adhesive Type: Water-based acrylic adhesive.
Backing / Carrier: Yellow washi paper.
Total Thickness: 92 µm
MD tensile strenght: 30 N/cm.
MD elongation at break: 3.5%.
Adhesion to steel plate: 1.4N/cm.
Service temperature: up to 110°C.
Roll size |
Rolls / Carton |
Rolls / Shrink polybag |
Shrink polybag / Carton |
19mm x 50m |
48 |
8 |
6 |
25mm x 50m |
36 |
6 |
6 |
30mm x 50m |
30 |
5 |
6 |
38mm x 50m |
24 |
4 |
6 |
50mm x 50m |
24 |
4 |
6 |