SLAA Pinterest

 

Road marking tape are heating-applied, preformed materials that are supplied in continuous rolls of various lengths and widths.Advantage over sprayed or extruded materials ,they do not require expensive application equipment or experienced operators to install, and require no drying or curing time.Synthetic rubber sheet backing without adhesive and heating by gas burners melt adhesive application.

Road marking tape provide excellent reflectivity, prolonged durability and positive guidance for the motoring public.White or yellow marking tapes designed to stripe asphalt parking lots, roads, bike paths and any other area where the road will subject to heavy traffic flow and high visibility delineation is needed. 

Tape Structure:

Yellow Road Marking Tape Structure

Tape Characteristic/Use:

  • Retro-reflective marking tape
  • Heat with burner
  • Handy work. Avoid the waste for time and cost
  • For traffic road, factory, car parking/Compartment line.
  • Marking Number/Letter/Log
  • Color : White and Yellow

Marking Tape Properties:

 Thickness

 1.5mm

 Tensile strength

 31.0 N/cm

 Resistant attrition rate

 45 mg

 Reflecting power

 83%

Marking Tape Installation:

Road Marking Tape Installation