SLAA Pinterest


Heat aluminum foil tape without liner are single-faced adhesive tape of aluminum foil backing which is coated by solvent acrylic adhesive (PSA). The tape can be manipulated based on the selection of the monomers used in the formulation.

Heat aluminum foil tape in which each layer of tape is directly on top of the last one. The aluminum foil tape without liner is a bright, soft temper aluminium foil, with a pressure sensitive adhesive. Foil is treated on one side with silicone for easy release on unwind.

Heat aluminum foil tape no liner don’t need to tear off the release paper liner during use, reduce operation time. So most of refrigerator factory use tihs self wound aluminum foil tape. Aluminium foil tape refrigeration will be offer good tack and adhesion to width range of temperature (from -30 degrees to 150 degrees).

SW-Self-wound, without release paper liner

Aluminum Foil Tape Applications:

  • Aluminum foil tape for exhaust, Aluminum foil tape for fire resistant, Aluminum foil tape for insulation, Aluminum foil tape for HVAC ducts, Aluminum foil tape for dryer vent.
  • All of these application of heat aluminum foil tape are good performance for high temperature.

Aluminum Foil Tape Features:

Good aging stability, high resistance to UV, ozone and humidity, best useful in long-term, outdoor applications.

Tape Properties:





Backing Thickness

50 Micron


PSTC-133 / ASTM D 3652

Total Thickness


3.6 Mil

PSTC-133 / ASTM D 3652

Adhesion to Steel



PSTC-101 / ASTM D 3330

Tensile Strength

75 N/25mm


PSTC-131 / ASTM D 3759




PSTC-131 / ASTM D 3759

Service Temperature

-20℃ to +80℃

-4℉ to +176℉


Applying Temperature

-10℃ to +40℃

+50℉ to +105℉


Tape Roll Size:

Finish Roll:

50mm x 50m 2” x 55yds
75mm x 50m 3” x 55yds
Log Roll: 1020mm x 50m
Jumbo Roll: 1020mm x 3000m