Use scrim-reinforced PE sealing tape for compatible panel joints, membrane overlaps and insulation seams.
The tape is intended for applications such as OSB panel joints, vapor barriers and compatible roofing membranes. It can also be considered for suitable housewrap and weather-resistive barrier (WRB) seams after compatibility with the membrane.
When properly selected and installed, this air leakage sealing tape helps reduce unwanted air movement through construction joints and supports moisture management in the building envelope.
The PE film tape backing is reinforced with a scrim structure. It combines flexibility with reinforcement to support handling and application across compatible joints and seams.
The acrylic-based adhesive helps this self adhesive PE film sealing tape bond to suitable construction substrates along panel joints and membrane overlaps.
Use air sealing tape for preventing air leakage at compatible construction joints as part of a continuous air-control layer.

The PE film tape backing is reinforced with a scrim structure. It combines flexibility with reinforcement to support handling and application across compatible joints and seams.
The acrylic-based adhesive helps this self adhesive PE film sealing tape bond to a suitable construction substrates along panel joints and membrane overlaps. Test adhesion on the actual surface before use.
Use air sealing tape for preventing air leakage at compatible construction joints as part of a continuous air-control layer. Its effective ness depends on substrate preparation, installation quality and the connections to adjacent materials.
When correctly applied to compatible materials, the tape helps limit moisture ingress through sealed joints and seams. The complete wall or roof assembly must still be designed to manage water and allow drainage where required.
Use PE film tape for sealing joints and seams across compatible straight edges and selected irregular details. Confirm that the tape construction and width suit the joint geometry and installation conditions.
Depending on surface condition and application requirements, this polyethylene sealing tape may be suitable for: OSB, plywood, wood, gypsum and cement fiberboards, metals, hard plastics and compatible membranes.
Use the tape to seal joints between compatible OSB panels, plywood and other wood-based sheathing materials. Sealed panel joints can contribute to a continuous air-control layer when the complete assembly is designed and installed for that purpose.
Use PE film sealing tape to seal overlaps and joints in compatible vapor barriers and vapor control membranes. A continuous joint helps connect adjacent membrane sheets as part of the intended air- or vapor-control strategy.
This polyethylene film tape for sealing applications can be considered for overlaps in compatible roof protection membranes and breather membranes.
Housewrap seam tape and WRB seam tape are commonly used to seal overlaps in compatible wall membranes.
When selecting air sealing tape for insulation joints, check adhesion to the insulation or foam board facing. This PE sealing tape for building insulation can be considered where the tape, board surface and complete assembly are compatible with the project's air control and moisture management requirements.
Air sealing tape for gaps and seams may be used around selected pipes, cables and irregular shapes where the tape construction, width and substrate are suitable.
| Property | Backing | Adhesive | Color | Reference Width | Reference Roll Length | Application Temperature | Temperature Resistance | UV Resistance | Solvent Free | Product Type |
|---|---|---|---|---|---|---|---|---|---|---|
| Typical Value | Scrim-reinforced polyethylene (PE) film | Acrylic-based adhesive / acrylate dispersion | White / green | 80 mm | 25 m | 0°C to +50°C | -40°C to +100°C | Up to 3-months | Yes | Single-sided self-adhesive construction sealing tape |
A: Air sealing tape is used to seal compatible construction joints, panel seams and membrane overlaps. This self-adhesive sealing tape uses a PE film backing and can help connect materials within a building envelope's air-control layer.
A: The tape is intended for compatible OSB panel joints. Check the surface condition and test adhesion on the actual panel, particularly if it has a coating or surface treatment.
A: It may be considered for compatible housewrap or WRB seams after adhesion and system compatibility have been confirmed. Follow the membrane manufacturer's instructions and the project's approved construction details.
A: This tape may be considered for compatible breather membrane tape. If the design requires a vapor-open tape, measured vapor permeance data for the exact product must be reviewed before selection.
A: Not necessarily. Window and door openings may require a dedicated flashing tape with a different width, conformability, backing or water management properties. Select flashing materials according to the opening detail and project requirements.
A: It may be suitable for selected exterior construction applications. Confirm substrate compatibility, expected weather exposure, UV limits and the required protection schedule before use.
A: A sealed joint can contribute to air barrier continuity, but whole building airtightness depends on the complete assembly, including other joints, transitions and penetrations.
A: For custom PE film air sealing tape requirements, send the required dimensions, substrate, intended application and quantity. Confirm available options with the manufacturer before specifying or ordering the tape.