Moisture infiltration around openings and structural joints is a leading cause of building envelope degradation. PE Flashing Tape provides a practical, long-lasting sealing solution designed to bridge gaps and shed water away from sensitive construction assemblies.
Constructed with a flexible polyethylene flashing tape carrier, it easily adapts to surface contours, corners, and uneven building transitions without cracking or splitting. Its aggressive solvent-based acrylic adhesive delivers strong initial tack for accurate positioning and establishes a durable bond once rolled onto approved substrates. Available in multiple roll widths, SLAA PE Flashing Tape allows installers to customize coverage and overlaps to meet strict architectural and building code specifications.

The flexible polyethylene backing conforms to contours, joints, transitions, and corners, helping maintain consistent surface contact in residential and commercial applications.
The solvent-based acrylic adhesive provides initial tack for positioning, while firm, even roller pressure ensures contact with the prepared substrate, especially at edges and overlaps.
Properly installed PE flashing tape helps reduce water entry at seams, openings, and transitions. Confirm suitability for the assembly and integrate it into a coordinated flashing and drainage system.
The roll format allows installers to cut the tape to the required length. Select the appropriate width for each detail, allowing for the coverage and overlaps required by the installation instructions.
Use PE window flashing tape and PE door flashing tape at specified sill, jamb and head flashing interfaces, following the required flashing sequence.
Covering panel joints where the tape is approved for the sheathing and wall assembly.
Sealing compatible details around pipes and other penetrations.
Covering joints between adjoining surfaces using the required tape width and installation method.
| Property | Product Name | Backing Material | Adhesive Type | Color | Product Format | Main Applications |
|---|---|---|---|---|---|---|
| Description | PE Flashing Tape | Polyethylene (PE) | Solvent-based acrylic adhesive | Black | Roll | Window and door flashing, sheathing seams and building envelope sealing |
A: PE flashing tape is a self-adhesive construction sealing tape with a polyethylene backing and an adhesive layer. It helps protect specified joints, openings and transitions from water penetration when installed as part of a suitable flashing and drainage system.
A: Typical applications include window and door flashing details, compatible sheathing seams, wall penetrations and corners. Suitability depends on the substrate, assembly design and product specifications.
A: Confirm application requirements, prepare a sound surface free from adhesion-reducing contaminants, then position the tape without tension or wrinkles. Press firmly with a suitable roller and inspect the edges and overlaps. Follow the product instructions for primer use, temperature and flashing sequence.
A: Compatibility should be checked before installation. Surface texture, porosity, contamination and material composition can affect adhesion. Test the tape on the intended substrate and follow the manufacturer's guidance.
A: If your project requires UV resistant polyethylene sealing tape, ask for the product's tested UV and weathering performance and permitted exposure limit; confirm it before leaving the tape uncovered.
A: For custom PE flashing tape requirements, contact the flashing tape manufacturer to confirm available widths, roll lengths and other options. Provide the intended substrate, application and required coverage so the supplier can assess the request. Customization availability and manufacturing capabilities must be confirmed before ordering.