Repulpable splicing tape (Double Side) have either a paper-based or non-woven, tissue-based carrier with a water-soluble, pressure-sensitive adhesive system which allows these tapes to be 100% biodegradable, recyclable and repulpable. In the paper and print industry, a splice is a process by which two rolls are combined using tape in order to create one seamless continuous roll.
Double sided repulpable splicing tape used at paper mills, newspapers, web printers to join 2 rolls of paper to increase the length or provide continuity of substrate. What sets double-sided repulpable splicing tape apart is its ability to dissolve in water and become part of the pulp during the recycling process.
Overlap Splice: Apply a double sided repulpable splicing tape to bond the overlapped section, attaching two substrates by overlapping the roll ends.
Flying splice: Apply a double sided repulpable splicing tape to the end of the roll. The Slitted liner of the tape is then removed one of apart to expose the second side of the adhesive and the new roll is overlapped to the adhesive, and ultimately joining the two together.
Repulpable tape adhesive is water soluble modified Acrylic adhesive.
Tape’s backing is a repulpable paper carrier.
Repulpable means that above materials can be recycled.
Tape provides low splicing thickness and high heat resistance up to 200 °C.
Adhesive |
Water soluble Modified Acrylic Adhesive |
||||||
Backing |
14g/㎡Repulpable Paper |
30g/㎡ |
14g/㎡ |
||||
Liner |
90 g/㎡ |
120 g/㎡ |
90 g/㎡ |
120 g/㎡ |
120 g/㎡ |
||
|
Silicone coated paper |
||||||
Product Code |
SW24-BG |
SW24-BCP |
SW24-RG |
SW30 |
SW24-TW |
||
Tape Thickness |
95±5um |
95±5um |
95±5um |
130±5um |
95±5um |
||
Tape color |
Blue |
Blue |
Red |
Blue |
Blue |
||
Ball tack at 25℃ |
Ball No.12 |
Ball No.18 |
|||||
Adhesion to Steel |
1,000gf/25mm |
2,150gf/25mm |
|||||
Heat Resistance |
150 ℃ |
120 ℃ |