Acrylic Adhesive Aluminum Foil Tape

Acrylic Adhesive HVAC Aluminum Foil Tape are single-faced adhesive tape of Aluminum Foil backing which is coated by Solvent Acrylic adhesive (PSA). It is industrially manufactured, and thus can be manipulated based on the selection of the monomers used in the formulation.

Acrylic Adhesive Aluminum Foil Tape will be offer good tack and adhesion to width range of temperature  (from -30 degrees to 120 degrees ).

Acrylic Adhesive HVAC Aluminum Foil Tape will be good aging stability, high resistance to UV, ozone and humidity, best useful in long-term, outdoor applications.

Application

HVAC Aluminum Foil Tape for HVAC ductworks.

Air Conditioner Aluminum Foil Tape.

Range Hood Vent Aluminum Foil Tape.

Aluminum Duct Tape for HVAC duct seam sealing.

Matte black aluminum foil tape use for taping exposed edges and board joints of HVAC ductwork system.

Aluminum foil adhesive tape easy to apply and readily confirms to irregular surfaces.

Dead-soft Aluminum foil tape adheres tightly when smoothed down on work surfaces.

Feature

Vapor barrier and flame retardant.

Excellent initial tack & adhesion power to Irregular Surface.

Good tack and adhesion to width range of temperature.

Service Temperature: -30 to +120 C, -22 to +248 F.

Applying Temperature: -10 to +40 C, +50 to +105 F.

Good aging stability, high resistance to UV, ozone and humidity, best useful in long-term, outdoor applications.

Roll Size

Finish Roll:  

50mm x 50m     2” x 55yds

75mm x 50m     3” x 55yds

Log Roll:   1020mm x 50m                

Jumbo Roll: 1020mm x 3000m